联系我们

联系我们

地址:山东省济南市槐荫区经十路28922号乐梦公寓3号楼1701

电话:0531-59825626

手机:18769786220

手机:13355353311

联系人:位经理

网址:

保温装饰板标准安装工艺介绍
来源:/ 日期:2018-09-13 发布人:admin

一种一体化保温装饰板的结构增强构造,其 中:所述保温板由两块分板叠合而成,且在所述 两块分板之间夹设有一齿状金属结构增强层。通 过在保温板中夹设一齿状金属结构增强层,使整 个保温板具有了更高的强度,即使随温度变化而 发生了一定的变形,也不会引起很大的变形与损 坏;本发明还进一步在金属板上设置齿状铆固 件,用于加强两分板之间的连接强度。

A structure strengthening structure of an integral heat preservation decorative board is provided, wherein the heat preservation board is formed by the superposition of two dividing boards, and a tooth-shaped metal structure strengthening layer is clamped between the two dividing boards. A tooth-shaped metal structure reinforcement layer is clamped in the heat preservation board, so that the whole heat preservation board has higher strength, even if the deion occurs with the change of temperature, it will not cause great deion and damage; furthermore, a tooth-shaped riveting fastener is arranged on the metal board to strengthen the connection between the two sub-boards. Strength.

1、保温装饰板安装对基层的要求:

1. Requirements for installation of thermal insulation decorative panels for grass-roots units:

保温装饰板特殊的层状结构,保证了保温装饰板本身坚固而平整。正常安装保温装饰板时基层应达到标准抹灰,不开裂、不掉粉、不起砂、不空鼓、不剥离、表面平整、立面垂直、阴阳角垂直。由于基层墙体略微的凹凸与粗糙可通过专用砂浆来调整,因而保温装饰板对基层的平整度与光洁度要求相对较低,而且处理相对简单。

The special laminate structure of the thermal insulation decorative board ensures that the thermal insulation decorative board itself is firm and smooth. Normal installation of insulation decorative board base should be up to standard plastering, non-cracking, do not drop powder, no sand, no empty drum, no stripping, flat surface, vertical vertical, vertical Yinyang angle. Because the base wall slightly convex and rough can be adjusted by special mortar, so the insulation decoration board on the base of the flatness and smoothness requirements are relatively low, and the treatment is relatively simple.

2、保温装饰板的粘贴:

2. Paste the insulation decorative board.

A级防火保温材料

保温装饰板为轻型板,产品自重每平方米仅为8-10公斤,因此只需专用砂浆将其直接粘贴至墙面,即可达规定的粘结强度要求。

Thermal insulation decoration board for light board, the weight of the product per square meter is only 8-10 kg, so only special mortar will be directly pasted to the wall, can meet the required bond strength requirements.

3、保温装饰板的锚固:

3. Anchorage of thermal insulation decorative panels:

为彻底消除保温装饰板分层剥离的现象,提高保温装饰板的整体安全性,使用锚固件,紧扣饰面层,并再次将保温装饰板与墙体牢固地连接在一起。这种复式固定模式,为高层建筑的外立面装饰提供了万全保障。

In order to eliminate the delamination and peeling of the insulation decorative board thoroughly and improve the overall safety of the insulation decorative board, anchors are used to fasten the decorative surface layer, and the insulation decorative board is once again firmly connected with the wall. This duplex fixed mode provides a comprehensive guarantee for the fa ade decoration of high-rise buildings.

4、保温装饰板的接缝处理:

4, joint treatment of thermal insulation decorative board:

在现场安装保温装饰板时,在两块板之间预留5mm-10mm宽的接缝。当成品板底部的砂浆干燥后,在接缝中嵌填泡沫材料,再用耐候型密封硅胶填平整条接缝。

During the installation of thermal insulation decorative panels, 5mm-10mm wide joints are reserved between the two panels. When the mortar at the bottom of the product board is dried, the foam material is embedded in the joint, and then the weatherproof sealing silica gel is used to fill the seam of the strip.



上一篇:你知道冬天的保温工作应该做哪些吗?
下一篇:岩棉板叠加使用的优势有哪些

 
在线咨询
全国咨询热线
18769786220
友情链接:云鼎彩票官网  秒速赛车官网  盛兴彩票官网  幸运彩票平台  秒速飞艇  盛世彩票  秒速赛车  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!