联系我们

联系我们

地址:山东省济南市槐荫区经十路28922号乐梦公寓3号楼1701

电话:0531-59825626

手机:18769786220

手机:13355353311

联系人:位经理

网址:

呼吸泥的施工步骤,你了解吗?
来源:/ 日期:2018-10-06 发布人:admin

呼吸泥是一种纯天然绿色无机内壁材料,提取矿物泥精华。由天然无机非晶微孔材料、高分散活性金属氧化物、无机氧化物超细粉和多种功能助剂组成。白色粉末,和水搭配比例使用,可用于调色。现在介绍房子内的呼吸泥的施工步骤,正确的步骤可以更好地装饰家。

Breathing mud is a kind of pure natural green inorganic inner wall material, which extracts the essence of mineral mud. It consists of natural inorganic amorphous microporous materials, highly dispersed active metal oxides, inorganic oxide ultrafine powder and a variety of functional additives. White powder, used in proportion to water, can be used for color matching. Now introduce the construction steps of the breathing mud in the house, the correct steps can better decorate the home.

1、基面处理:施工前应保持呼吸泥基面平整、干净、整齐、无裂缝、不渗水。

1. Base treatment: Before construction, the base surface of breathing mud should be kept smooth, clean, neat, crack-free and impervious.

2、调和:施工前我们必须搅拌呼吸泥。根据比例准备好称量适当的呼吸泥和水,先将水倒入搅拌器中,然后加入呼吸泥。与电动搅拌机混合后,仍需五分钟,然后进行两次混合,使呼吸泥浆均匀细腻。

2, reconciliation: before construction, we must stir up the breathing mud. Prepare to weigh the appropriate amount of breathing cement and water according to the proportion. First pour the water into the agitator and then add the breathing mud. After mixing with the electric mixer, it still takes five minutes, and then mixes twice to make the breathing mud even and delicate.

A1级防火保温材料

3、刮涂:采用不锈钢刮刀刮除第一次刮泥,刮涂层厚度应控制在0.5~1mm,涂层光滑平整,无明显刮痕、气泡和空鼓。当第一次呼吸泥不粘时,在进行第二次刮涂,要求与之前相同。

3. Scraping: Use stainless steel scraper to scrape the mud for the first time. The thickness of the scraping coating should be controlled between 0.5 mm and 1 mm. The coating is smooth and smooth without obvious scratches, bubbles and empty drums. When the first breath is not sticky, do second scraping and apply the same as before.

4、滚涂:等呼吸泥干透后,用滚子滚涂两遍呼吸泥伴侣,滚涂均匀,接茬处注意平整。

4. Rolling: After the breathing mud is dried through, roll the mud companion twice with the roller. Roll the mud evenly and pay attention to the leveling of the stubble.

5、压花操作:呼吸泥可用于雕刻表面纹理和图案。涂抹后的呼吸泥完全干燥后,可根据工作方法或图案压花滚筒的设计制作纹理图案,并在长效呼吸泥浆表面进行压花。速度和力必须平滑均匀,以保证图案的一致性。

5. Embossing operation: Breathing mud can be used to sculpt surface texture and pattern. After the smeared breathing mud is completely dried, the texture pattern can be made according to the working method or the design of the pattern embossing roller, and embossed on the surface of the long-term breathing mud. Speed and force must be smooth and uniform to ensure pattern consistency.


上一篇:注意啦!呼吸泥比硅藻泥好在这里
下一篇:真空绝热板在冷藏设备中的优势

 
在线咨询
全国咨询热线
18769786220
友情链接:秒速赛车  盛兴彩票  88彩票网  盛世彩票官网  幸运蛋蛋开奖走势图  幸运蛋蛋开奖直播  秒速赛车  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!